Page 1 of 1

Flight plan upload fails (Mavic 2 Pro)

Posted: Sat Oct 13, 2018 7:43 am
by trigojo
We are currently investigating the use of drone harmony with the new DJI Mavic2 Pro.
However, we are not able upload the flight plan to the drone due to an timeout error.

We use the newest firmware for the drone, RC and app.
During the test we also rebooted all devices.

Any idea what the reason might be?
Any experiences so far with the Mavic 2 Pro?

Many thanks for your help.
Jochen

Re: Flight plan upload fails (Mavic 2 Pro)

Posted: Tue Oct 16, 2018 10:19 am
by gil_dh
Hi Jochen,
We didn't exterience this issues with our MP2 during tests. It could be that the issue relates to parameters that are specific to your mission and that the DJI library behaviours is different for MP2, it would be helpful if you could send the mission to us using the "Export State" feature from the menu by attaching to email and sending to support@droneharmony.com.
Thank you

Re: Flight plan upload fails (Mavic 2 Pro)

Posted: Wed Oct 17, 2018 5:34 pm
by Frank2018
I have the same problem.
I manage to start the copter and let it float a few meters above me.
Only then will I upload the mission and it will be executed.

Re: Flight plan upload fails (Mavic 2 Pro)

Posted: Thu Oct 18, 2018 9:10 am
by gil_dh
We reproduced the issue (it happens after latest MP2 firmware update), we will try to find a workaround and publish an app update in the coming days.
DH Team

Re: Flight plan upload fails (Mavic 2 Pro)

Posted: Fri Oct 19, 2018 11:59 am
by nicokalo
Just a quick message to tell you that today I had the same issue with my Mavic Pro 2. I tried everything I could think off (reboot, battery switch, start with dji go, etc) but I wasnt able to make my drone fly.
I was lucky that it was only a test, but I think you need to find a solution because I can’t imagine what Would had happen if it was with a client.

Thank you

Re: Flight plan upload fails (Mavic 2 Pro)

Posted: Sun Oct 21, 2018 10:35 am
by gil_dh
We released an update (version 1.7.1) that fixes this issue, now the launch should work also with latest DJI firmware for Mavic 2.
DH Team